Troubleshooting

UNIPASS Troubleshooting Guide:

 

1. UNIPASS® Was Not Permitted To Be Installed In C:Program Files Directory
2. SafeNet Security Software Was Not Installed Properly
3. USB Port Security Device Was Not Read Properly
4. Operation Buttons Are Not Displayed In The Method Definition Window
5. The Installation Support Files Cannot Be Installed In C: Drive
6. Update License Data From License Key
7. New Macro Commands In UNIPASS.IN
8. UNIPASS.IN Was Not Created Before Running The UNIPASS® Solver
9. Run UNIPASS® In A Read-Only Folder
10. The Path Length To Run UNIPASS® Solver Is Longer Than 80 Characters
11. UNIPASS® Education Version Can Only Run Example Problems Listed In Training Problem Reference Guide
12. Missing Table of Contents in UNIPASS® HTML Output File
13. Missing Operator * Between Two Parentheses or Between Constant and Random Variable in Function Definition Window
14. Function Name Repeated in Function Definition Window
15. Failure To Define Minimum Cut set in Function Definition Windows
16. Variable Definition Window Crashes
17. No Failure Domain in the Probability Analysis
18. Improper Convergent Tolerance for g(x) = g_init in MPP Identification
19. Curvature Fitting of SORM Is Not Available For Non-gradient MPPL Method
20. Number of Sample Points Is Not Enough in Monte Carlo Simulation
21. Maximum Number of g-function Calculations Is Less Than the Number of Sample Points in the Monte Carlo Simulation
22. Maximum Number of g-function Calculations Is Less Than the Number of Sample Points in Directional Simulation
23. The Maximum Number of g-function Calculations Is Less Than the Number of Sample Points In Sphere Based Importance Sampling Method
24. Fitting Points May Be Out of Scope For g-function Calculation In Response Surface Method Based On User Defined Expansion Point
25. The Number of Random Variables Is Limited To Be Between 3 and 16 In Response Surface Method
26. Mean Value First-Order Second Moment Method only uses first two moments of random variables
27. MV and AMV Use Full Distributions of Random Variables
28. Parametric File Was Not Exited Before Running UNIPASS® Solver In Conjuction With External Softw
29. Insufficient Space To Enter Enough Significant Value For Random Variables In Parametric File
30. Verify The Results From External Software By Using VARS.SAV

Return to Top

9. Run UNIPASS® In A Read-Only Folder

Opening a UNIPASS file (i.e. a ".PAS" file) in a folder with read-only attributes, will generate the following error message:

Figure 3.1 Error Message When Opening a UNIPASS File with Read-Only Attributes

Follow the steps list below to resolve this problem:

1. Select all files by clicking the "Select All" option in the Edit drop down menu as shown in Figure 3.2.

Figure 3.2 Select All Files

2. Place the cursor in the marked area and then click the right button of the Mouse.

3. Select the "Properties" in the drop down list as shown in Figure 3.3.

Figure 3.3 Dropdown Menu Containing "Open with ..." Appears by Right-Clicking on Selected Files

4. When the Properties Window appears as shown in Figure 3.4, remove the Read-Only attribute check mark, and then click "OK" to close the window.

Figure 3.4 Properties Window